Centro di assistenza

Strumenti per sistemi elettrici - Analizzatori di alimentazione

Tutti i prodotti (31) Vista griglia Vista griglia Vista lista Vista lista

Extech 380803

True RMS Power Analyzer Datalogger

The Extech 380803 is a True RMS Power Analyzer and Datalogger. This power analyzer simultaneously displays the wattage, power factor (VA), voltage or frequency (Hz), and current (Amps) of the device or appliance tested. The built-in datalogger can store up to 1,012 readings, or you can save data directly to your PC using the RS-232 port and included software. Additional features include max hold, data hold, and overload protection. Battery or AC Adaptor Operation provides line isolation. Comes complete with 8 AA batteries, software, cable, power cord, AC Adaptor, and case.

Extech 380940

400A True RMS AC/DC Watt Clamp-on

The compact Extech 380940 is a 400 Amp mini True RMS AC/DC power clamp meter. It has a small-diameter jaw designed to reach in small areas while providing power calculations up to 240 kW. With the added convenience of instant watt readings, a feature normally reserved for full-size meters, this mini power clamp is useful for essential troubleshooting tasks in plant maintenance, electrical, HVAC, and telecom work, as well as residential electrical repairs, energy audits, fleet maintenance, marine, and motorcycle repair. Complete with test leads, 2 AA batteries, and carrying case.

Extech 380976-K

Kit pinza amperometrica CA monofase/trifase 1.000 A

Il 380976-K è un kit pinza amperometrica CA monofase/trifase da 1.000 ampere. Misura potenza mono-trifase reale (kW), potenza apparente (kVA), potenza reattiva (kVAR), cavalli (HP), fattore di potenza e angolo di fase con indicatore di carico/ritardo Autorilevazione delle misure di tensione AC/DC con visualizzazione simultanea della frequenza. Inoltre, il kit di cavi di prova fornito include due cavi di prova CAT IV da 72”, 2 impugnature modulari per sonde di prova, 2 clip a ganasce attivate con stantuffo e 2 clip a coccodrillo extra grandi. Completo di conduttori di test, sonda generica tipo K, custodia da trasporto e batteria da 9 V.

Extech 382075

2000A True RMS AC/DC 3-Phase Clamp-on Power Analyzer

The Extech 382075 is a 3-Phase True RMS Clamp-on Power Analyzer which can be used on 3 and 4 wire balanced or unbalanced loads. It can measure reactive and apparent power up to 1200 kW. Additional measurements include watts, voltage, current, frequency, power factor, and phase angle. It can display lead, lag current, and voltage phase shift in degrees, plus it can also store and recall the previous 4 readings. Additional features include DC current auto zero, data hold, min/max, and relative mode. Comes complete with test leads, carrying case, and 9 V battery.

Extech 382097

Sonde a pinza per corrente da 100 A

Extech 382097 è un set di sonde a pinza per corrente da 100 A per gli analizzatori di potenza modelli 382095 e 382096.Questo set di sonde a pinza è composto da tre sonde con una ganascia da 30 mm.Il modello 382097 è coperto da una garanzia di due anni.

Extech 382098

3000A Flexible Current Clamp Probes

Extech's 382098 is a set of 3000 A Flexible Current Clamp Probes for the model 382095 and 382096 power analyzers. Comes with three flexible AC probes that are 610 mm (24 in) long for wrapping around busbars.

Extech 382100

Analizzatore di potenza trifase/Registratore dati da 1200 A

Extech 382100 è un analizzatore di potenza trifase/registratore dati che salva i dati (fino a 30.000 set di misurazioni) su una scheda SD in formato Excel per un facile trasferimento su PC.Il dispositivo fornisce un’analisi completa del sistema con un massimo di 35 parametri, tra cui:V (fase-fase), V (fase-terra), A (fase-terra), KW/KVA/KVAR/PF (fase), KW/KVA/KVAR/PF (sistema), KWH/KVAH/KVARH/PFH (sistema) e angolo di fase.Le letture vengono visualizzate su un ampio LCD retroilluminato a matrice di punti leggibile in piena luce solare.Il dispositivo è dotato di tre pinze per corrente, quattro cavi di tensione con clip a coccodrillo, otto batterie AA, scheda di memoria SD, adattatore CA universale (da 100 a 240 V), custodia e manuale utente.

Extech DL150

Registratore di tensione/corrente CA True RMS

Extech DL150 è un registratore di dati di corrente e tensione CA True RMS.Registrazione dati fino a 100.000 letture di tensione CA TRMS (600 V) o corrente (200 A), con frequenza di campionamento programmabile dall’utente da 1 secondo a 24 ore.Il display LCD indica ora/data, lettura corrente, min/max e il superamento degli allarmi alto/basso impostabili dall’utente.Le letture possono essere scaricate sul PC tramite l’interfaccia USB.Modalità di registrazione Normale, Picco e Acquisisci (usando livelli di soglia programmabili).Fornito con pinza di corrente, cavi di test, clip a coccodrillo, software, cavo USB, alimentatore CA da 110 V e 4 batterie AAA.

Extech DL160

Registratore di dati tensione/corrente CA True RMS a doppio ingresso

Il DL160 è un registro dati di corrente/tensione CA True RMS a doppio ingresso. Contemporaneamente, i dati registrano due canali con un massimo di 256.000 letture di tensione CA TRMS (600 V) o corrente (200 A) o un ingresso di tensione CA e una corrente CA con una frequenza di campionamento programmabile dall’utente da un secondo a 24 ore. Il display LCD visualizza ora/data, lettura corrente e min/max. Le letture possono essere scaricate sul PC tramite l’interfaccia USB. Modalità di registrazione Normale, Picco e Acquisisci (usando livelli di soglia programmabili). Completo di due morsetti per corrente, due set di cavi di prova, due set di clip a coccodrillo, software, cavo USB, adattatore CA universale, quattro batterie AAA e due batterie CR2032.

Extech PM120

Power Monitor

Monitor and record power usage of home and work appliances for energy conservation and cost reduction analysis with the Extech PM120 Power Monitor. This helps you determine if the electrical device should be replaced with a higher efficiency unit. The PM120 has a large dual LCD. The primary display shows voltage, current, power, power factor, and frequency readings. The secondary display shows total time, cost (cost of operation per minute, day, or week), set, or energy. Design includes a standard, North American 3 prong plug, front socket connection, and backup battery that saves customized programs.

Extech PQ1000

Voltage Test Leads

The Extech PQ1000 is a CAT IV Test Lead accessory kit For PQ3400 series power analyzers. It includes a set of 4, 3 m (10 ft) test leads (black, red, blue, yellow) with shrouded banana plugs on both ends (right angle on one end). Includes test probes, alligator clips, and long reach spring loaded clips.

Extech PQ2071

Pinza amperometrica CA True RMS monofase/trifase da 1.000 A

Il dispositivo PQ2071 è una pinza amperometrica CA True RMS monofase e trifase da 1.000 A. La pinza amperometrica multifunzione PQ2071 di Extech funziona come pinza amperometrica, misuratore di potenza, multimetro e rilevatore di tensione CA True RMS. Dotata di un grado di sicurezza CAT IV-600 V, consente di misurare corrente, tensione, frequenza e potenza in CA, inclusi potenza reale, potenza apparente, potenza reattiva e potenza attiva. Consente di misurare la potenza reale monofase e trifase bilanciata (kW), la potenza apparente (kVA), la potenza reattiva (kVAR) e la potenza attiva (kWh), oltre al fattore di potenza e all’angolo di fase. Dotata di un’apertura della ganascia del morsetto da 55 mm (2,16”). Ampio doppio display LCD (con fondo scala a 9.999) con grafico a barre. Misurazioni di frequenza fino a 200 Hz. Consente di memorizzare/richiamare manualmente fino a 99 set di dati. Funzioni di valori max/min, mantenimento dei dati e spegnimento automatico. Interfaccia USB per la connessione a un PC per la funzione di registrazione dei dati con software incluso. Completa di cavi di test, quattro cavi codificati a colori e clip a coccodrillo, cavo USB, software per PC, batteria da 9 V e custodia morbida.

Extech PQ3110

100A Current Clamp Probes

The Extech PQ3110 is a Clamp Probe kit for use with PQ3350 power quality analyzer. Comes with three clamps with a 30 mm (1.2 in) clamp jaw.

Extech PQ3120

Sonde a pinza per corrente da 1000 A

Extech PQ3120 è un set di sonde a pinza da 1000 A (set di 3) per l’analizzatore PQ3350.Queste sonde a pinza sono dotate di una ganascia da 56 mm.

Extech PQ3210

Sonde a pinza per corrente flessibili 1.200 A

L’Extech PQ3210 è un set di tre morsetti flessibili da 1.200 A per l’analizzatore di potenza e armoniche trifase Extech PQ3350. Queste sonde sono lunghe 304 mm (12 pollici) per avvolgersi intorno alle busbar.

Extech PQ3220

3000A Flexible Current Clamp Probes

The Extech PQ3220 is a set of 3000 Amp flex clamps (set of 3) for the PQ3350 analyzer. Probes are 61 cm (24 in) for wrapping around bus bars.

Extech PQ3350

3-Phase Power & Harmonics Analyzer

The Extech PQ3350 is a 3-Phase Power and Harmonics Analyzer made for single and 3-phase/3-wire or 3-phase/4-wire systems. The large, backlighting LCD displays up to 35 parameters in one screen. With the PQ3350, data log up to 52,428 single phase readings or 17,476 3-phase readings, and simultaniously display total harmonic distortion (THD-F) and waveform with peak values (1024 samples/period). Includes 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case. Current Probes sold separately.

Extech PQ3350-1

3-Phase Power & Harmonics Analyzer

The Extech PQ3350-1 is a 3-Phase Power & Harmonics Analyzer capable of up to 52,428 single phase readings or 17,476 3-phase readings. It includes a large backlighting LCD displays up to 35 parameters in one screen, and allows for the simultanious display of harmonics and waveform. For single and 3-phase/3-wire or 3-phase/4-wire systems. Complete with 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case.

Extech PQ3350-3

3-Phase Power & Harmonics Analyzer

The Extech PQ3350-3 is a 3-Phase Power & Harmonics Analyzer capable of up to 52,428 single phase readings or 17,476 3-phase readings. It includes a large backlighting LCD that can display up to 35 parameters in one screen, and allows for the simultanious display of harmonics and waveform. For single and 3-phase/3-wire or 3-phase/4-wire systems. Complete with 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case. Current Probes sold separately.

Extech PQ34-12

Sonde a pinza per correnti fino a 1200 A

Extech PQ34-12 è un set di sonde a pinza per correnti fino a 1200 A.Da utilizzare con gli analizzatori PQ3450 e PQ3470.Dotato di una ganascia da 50 mm, dispone di tre sonde a pinza per corrente e di una garanzia di un anno.

Extech PQ34-2

Sonde a pinza per correnti fino a 200 A

Extech PQ34-2 è un set di sonde a pinza per correnti fino a 200 A.Da utilizzare con gli analizzatori PQ3450 e PQ3470.Dotato di una ganascia da 19 mm, dispone di tre sonde a pinza per corrente e di una garanzia di un anno.

Extech PQ34-30

3000A Current Flexible Clamp Probes

The Extech PQ34-30 is a set of 3000 A Flexible Current Probes for PQ3450/PQ3470 power quality analyzers. It has a 61 cm (24 in) length for wrapping around bus bars and wire bundles. Switch between 3 ranges: 3000 A, 300 A, and 30 A.

Extech PQ3450

3-Phase Power Analyzer/Datalogger

The Extech PQ3450 is a 3-phase power analyzer/data logger capable of logging up to 30,000 sets of measurements in Excel® format on a removable SD memory card. The product is easy-to-hold with a rugged over molded housing. It features a built-in clock and calendar, 35 parameters, and a CAT III 600V safety rating. Complete with a year warranty, 4 voltage leads with alligator clips, 8 AA batteries, SD card, 100-240 Volt AC adaptor and case. Clamp probes sold separately.

Extech PQ3450-12

1200A Datalogging Power Analyzer Kit

The Extech PQ3450-12 is a 3-phase power analyzer/data logger capable of logging up to 30,000 sets of measurements in Excel® format on a removable SD memory card. It includes a large dot-matrix, built-in clock and calendar, and a backlit LCD with easy-to-use onscreen menu. It allows for full system analysis with up to 35 parameters. The adjustable Current Transformer CT (1 to 600) and Potential Transformer PT (1 to 1000) ratio allows for high power distribution systems. Log up to 30,000 reading on a removable SD memory card in Excel® format. Wide sampling rate range (2 seconds to 2 hours). Complete with 4 voltage leads with alligator clips, three 1200 A current clamps, 8 AA batteries, SD card, 100-240 V AC adapter, and case.